Go to a Product --Products-- Aerocel EPDM Aerocel-CG Aerocel White/Gray 25/50 Aerocel-SSPT Aerocel Continuous Tube --Accessories-- Aerotape Aerocoat Protape Aerofix-U Aeroseal Everseal      home    |   products & technical data    |   where to purchase    |   contact us Aerocel Continuous Tube Aerocel EPDM Aerocel White/Gray 25/50 Aerocel-CG Aerocel-SSPT Aerocoat Aerofix-U Aeroseal Aerotape Everseal Protape Aerocel-CG Closed Cell Elastomeric Thermal lnsulation for HVAC & Refrigeration Aerocel-CG Tube and Sheet lnsulation is a flexible, closed cell and light weight elastomeric material designed for insulating liquid cooling and heating lines. Aerocel-CG is available in 3/8", 1/2", 3/4" and 1" thickness, and popular sizes up to 1 1/8" ID. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation. Aerocel-CG is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation: Thermal Conductivity: 0.25 Water Vapor transmission: 0.10 Fire Rating: Will not contribute significantly to fire (simulated end-use testing). Aerocel-CG Pipe Insulation, in 3/8", 1/2", 3/4" and 1" thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 Surface Burning Characteristics of Building Materials. Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified. Key Features Best UN resistance in its class Low thermal conductivity Easy to install 25/50 rated Versatile, for heating, AC, refrigeration, plumbing Uses Aerocel-CG Pipe Insulation is used to retard heat gain and control condensation drip from coldwater plumbing, chilled water, and refrigeration lines. It also efficiently reduces heat flow for hot water plumbing and liquid heating and dual temperature piping. The recommended temperature usage range for Aerocel Pipe Insulation is -70° to 257°F. Resistance to Moisture Vapor Flow The closed-cell structure of Aerocel-CG lnsulation effectively retard the flow of moisture vapor, and Aerocel-CG is considered a low transmittance vapor retarder protection. Application Aerocel-CG Pipe Insulation in unslit tubular form can be slipped onto piping before it is connected, or it can be slit lengthwise and snapped over piping already connected. Butt joints and seams are to be sealed with contact adhesive; therefore, both surfaces to be joined are coated with adhesive. Aerocel-CG is designed for installation above and below ground, indoors and outdoors. No protective finish is required. In addition to the specifications listed below, Aerocel-CG also conforms to the following: ASTM C 534, ASTM D 1056, NY City MEA #171-04-M, City of LA RR-8413, UL 181 Section 12 MOLD Growth/Humidity, UL 181 Section 17 Air Erosion, UL-94 V0, 5V, UL 723, NFPA 90A & 90B, MIL 15280J. Technical Data Specifications Download MSDS sheet Download product sheet home | products & technical data | where to purchase | contact us | legal | terms and conditions This site is protected by copyright and trademark laws under US and International law. All Rights Reserved ©2008 Aeroflex USA, Inc.