Aeroflex USA, Inc. | Products | Aerocel EPDM Sheet for Duct and Large Surfaces | Insulation Tubes | Flexible Closed Cell | EPDM | EPDM closed cell foam | EPDM Foam | Rubber Insulation Products | Thermal Insulation Tubes, Thermal Insulation Sheets, Thermal Insulation Rolls, Rubber Insulation Products | Closed Cell Elastomeric Thermal Insulation for HVAC Refrigeration

	Aerocel Continuous Tube
	Aerocel EPDM
	Aerocel EPDM Sheet for Duct and Large Surfaces
	Aerocel White/Gray 25/50
	Aerocel-CG
	Aerocel-SSPT (Stay-Seal® with Protape)

	Aerocoat
	Aerofit
	Aerofix-U
	Aeroseal
	Aerotape
	Everseal
	Protape

Aerocel EPDM Sheet for Duct and Large Surfaces

Closed Cell Elastomeric Thermal lnsulation for HVAC & Refrigeration

Aerocel EPDM Sheet lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 3/8", 1/2", 3/4", 1" 1-1/4", 1-1/2" and 2" wall in popular I.D. sizes up to 6" IPS. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation.

Aerocel EPDM is manufactured to consistently provide tested values - not theoretical calculations - on these key performance criteria for mechanical system insulation:

Thermal Conductivity: 0.245
Water Vapor transmission: 0.03
Fire Rating: Will not contribute significantly to fire (simulated end-use testing).

Aerocel Pipe lnsulation in 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 "Surface Burning Characteristics of Building Materials."

Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified.

Key Features

UV Resistant
Low thermal conductivity
Easy to install
25/50 rated through 2" wall
Versatile for heating, AC, refrigeration and plumbing
EPDM Rubber
Moisture Resistant

Uses

Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines. It also efficiently reduces heat flow for hot water plumbing, liquid heating and dual temperature piping. It also efficiently reduces heat flow for hot water plumbing, liquid heating and dual temperature piping. The recommended temperature usage range for Aerocel EPDM Pipe lnsulation is -70°F to +300"F ( -183°C to +149°C) CONTINUOUS. Our current specification sheet is incorrect on this subject and we apologize for the oversight of providing the correct range in degree Celsius units. When re-published, our new specification sheet will reflect the corrected service temperature range for the degree Celsius temperature unit system.

Resistance to Moisture Vapor Flow

The closed-cell structure of Aerocel EPDM lnsulation effectively retards the flow of moisture vapor, and Aerocel EPDM is considered a low transmittance vapor retarder. Aerocel EPDM requires no supplemental vapor retarder protection.

Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified. 25/50 rated Versatile for heating, AC, refrigeration and plumbing.

Application

Aerocel EPDM Pipe Insulation in unslit tubular form can be slipped onto piping before it is connected, or it can be slit lengthwise and snapped over piping already connected. Butt joints and seams are to be sealed with contact adhesive; therefore, both surfaces to be joined are coated with adhesive. Aerocel is designed for installation above and below ground, indoors and outdoors. No protective finish is required.

In addition to the specifications listed below, Aerocel EPDM also conforms to the following: ASTM C 534, ASTM D 1056, NY City MEA #171-04-M, City of LA RR-8413, UL 181 Section 12 Mold GrowthIHumidity, UL 181 Section 17 Air Erosion, UL 94 5 V-0, UL 723, NFPA 90A & 90B, MIL l528OJ.

Technical Data

Download MSDS sheet

Download product sheet


	home \| products & technical data \| where to purchase \| contact us \| legal \| terms and conditions This site is protected by copyright and trademark laws under US and International law. All Rights Reserved ©2008 Aeroflex USA, Inc.