Go to a Product --Products-- Aerocel EPDM Aerocel-CG Aerocel White/Gray 25/50 Aerocel-SSPT Aerocel Continuous Tube --Accessories-- Aerotape Aerocoat Protape Aerofix-U Aeroseal Everseal      home    |   products & technical data    |   where to purchase    |   contact us Aerocel Continuous Tube Aerocel EPDM Aerocel White/Gray 25/50 Aerocel-CG Aerocel-SSPT Aerocoat Aerofix-U Aeroseal Aerotape Everseal Protape Aerocel-SSPT Closed Cell Elastomeric Thermal lnsulation for HVAC & Refrigeration Aerocel-SSPT Tube and Sheet lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 3/8", 1/2", 3/4" and 1" wall in popular I.D. sizes up to 6" IPS. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation. Aerocel-SSPT is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation: Thermal Conductivity: 0.25 Water Vapor Transmission: 0.1 Fire Rating: Will not contribute significantly to fire (simulated end-use testing). Aerocel-SSPT Pipe lnsulation in 3/8", 1/2", 3/4" and 1" thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 "Surface Burning Characteristics of Building Materials." Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified. Key Features UV Resistant Low thermal conductivity Easy to install 25/50 rated through 2" wall Versatile for heating, AC, refrigeration and plumbing Uses Aerocel-SSPT Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines. It also efficiently reduces heat flow for hot water plumbing, liquid heating and dual temperature piping. The recommended temperature usage range for Aerocel Pipe lnsulation is -70°F to +257°F. Resistance to Moisture Vapor Flow The closed-cell structure of Aerocel-SSPT lnsulation effectively retards the flow of moisture vapor, and Aerocel is considered a low transmittance vapor retarder. Aerocel requires no supplemental vapor retarder protection. Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified. 25/50 rated Versatile for heating, AC, refrigeration and plumbing. Application Aerocel-SSPT Pipe Insulation in unslit tubular form can be slipped onto piping before it is connected, or it can be slit lengthwise and snapped over piping already connected. Butt joints and seams are to be sealed with contact adhesive; therefore, both surfaces to be joined are coated with adhesive. Aerocel is designed for installation above and below ground, indoors and outdoors. No protective finish is required. In addition to the specifications listed below, Aerocel-SSPT also conforms to the following: ASTM C 534, ASTM D 1056, NY City MEA #171-04-M, City of LA RR-8413, UL 181 Section 12 Mold GrowthIHumidity, UL 181 Section 17 Air Erosion, UL 94 5 V-0, UL 723, NFPA 90A & 90B, MIL l528OJ. Technical Data Specifications Thickness Recommendation Data Download MSDS sheet Download product sheet home | products & technical data | where to purchase | contact us | legal | terms and conditions This site is protected by copyright and trademark laws under US and International law. All Rights Reserved ©2008 Aeroflex USA, Inc.